Features
Range: 0 200 ppm
Resolution: 1 ppm
20×4 OLED display & inbuilt air sampling pump; can draw sample from 30m
Continuous as well as Batch sampling provision
Data logging facility with information like Gas_conc., Warehouse no., Silo no., Date & Time.
USB interface
GUI for data downloading sorting & report generation
Specification
Gas Name: Methyl Bromide
Range: 0-200 ppm
Resolution: 1 ppm
Sensors: Solid state sensor
Accuracy: Inherently +/- 2% FS (but also depends on the calibration gas & method)
Drift: less than 2% of the signal per month at constant temperature and pressure.
Sampling modes: Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling.
Alarm set point: One user settable alarm set point (for low range detectors)
Data Storage: Provision to store test records with gas conc. and alarm set points along with date and time.
Power source: 7.4V mAh Li-ion rechargeable battery pack
Inbuilt Pump Flow Rate: 400 to 800 ml/min
Power: 3.5V DC, 60 mA
Runtime: About 6 8 hours
Data Transfer: USB communication for data transfer from instrument to computer
Function keys: UP, DOWN, SET & ENTER
Operating temperature: -10 °C to 50 °C
Display: Large 20 x 4 Alphanumeric OLED
Instrument Enclosure: High Impact ABS
Size: Height = 190 mm Depth = 40 mm Width1 = 110 mm Width2 = 65 mm
Weight: 500 g
Accessories: Dust filter, battery charger, data downloading cable and outlet coupler.